Loading Discs - Denon Professional DN-V200 Instrucciones De Operación

Ocultar thumbs Ver también para DN-V200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7 LOADING DISCS

2 Set discs in the disc tray with the labeled (printed) side facing up.
Outer disc guide
(12 cm disc)
Disc tray
Inner disc guide
(8 cm disc)
NOTE:
• Do not move the DN-V200/DN-V300 while a disc is playing.
Doing so may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the Open/Close button.
POWER button
Disc tray
NOTES:
• Be sure to turn on the power before opening and closing
the disc tray.
• Do not strike on the button with a pencil, etc.
Open/Close button
(2) Loading Discs
• Pick up the disc carefully so as not to touch the signal surface
and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in
the inner tray guide (Figure 2).
• Press the Open/Close button. The disc is automatically loaded.
• The disc tray can also be closed automatically to load the disc
by pressing the PLAY button.
Figure 1
Outer disc guide
12 cm disc
Figure 2
Inner disc guide
8 cm disc
NOTES:
• If your foreign object is caught in the disc tray during
closing, simply press the Open/Close button again and
the tray will open.
• Do not press the disc tray in by hand when the power is
off. Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so will
damage it.
ENGLISH
19

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dn-v300

Tabla de contenido