Connections - Denon Professional DN-V200 Instrucciones De Operación

Ocultar thumbs Ver también para DN-V200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH

4 CONNECTIONS

• Read the manuals of all the components when making
connections.
• Keep the power supply cord unplugged until all connections
have been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
(1) Connecting to a TV
• Use the included audio video cord to connect the TV's video input connector and audio input connectors to the DN-V200/DN-V300's
VIDEO OUT or S-VIDEO OUT and AUDIO OUT.
• Check that "P.SCAN" on the front panel display is off. If "P.SCAN" is lit, press the "SHIFT" and "P.SCAN" button on the front panel
so that "P.SCAN" turns off. Pictures are not output properly if "P.SCAN" is lit.
S-Video output connector
The video signals are divided into color (C) and
brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector,
we recommend connecting it to the DN-V200/DN-
V300's S-Video output connector using a commercially
available S-Video connection cord.
AUDIO IN
L
R
• Connect the DN-V200/DN-V300's video outputs to the TV
either directly or through an AV amplifier. Do not connect it
via a VCR (video cassette recorder). Some discs contain
copy prohibit signals. If such discs are played via a VCR, the
copy prohibit system may cause disturbance in the picture.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to
comply with your TV's video format. When the TV is NTSC
formatted, set to NTSC (see page 23).
10
NOTES:
TV
VIDEO IN
S-VIDEO IN
NOTES:
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power supply cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power supply cord together with connection
cords may result in humming or noise.
DN-V200/DN-V300
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to
comply with your TV's aspect (see page 22).
• No audio signals are output from the DN-V200/DN-V300's
"AUDIO OUT" connector when discs recorded in DTS are
played.
To power outlet

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dn-v300

Tabla de contenido