MObIlE HOME REqUIREMENTS
The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title
24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part
280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/
NFPA 501A or with local codes. In Canada, the installation of this range must conform with the current standards
CAN/CSA-A240-latest edition, or with local codes.
When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of
securing the range is adequate as long as it conforms to the standards listed above.
11