Burner Locations - Magic Chef MCSRE24S Manual Del Usuario

Estufa eléctrica independiente de 24 pulgadas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.
Press the "
button and set the timer for how long the oven needs to cook.
3.
Switch on the oven immediately, the "
4.
Adjust knobs to select cooking mode and temperature.
5.
When the full amount of time set has passed, the cooking will stop and the oven will switch off
automatically.
6.
The "
" symbol above "
7.
To stop the alarm ringing, press any button.
b.
Setting timer with the end time of cooking
1.
longest time that can be set is 23 hours and 59 minutes.
2.
Press the "
button and set the time for oven to stop cooking.
3.
Switch on the oven immediately, the "
4.
Adjust knobs to select cooking mode and temperature.
5.
When it reaches the time set, cooking will stop and the oven will switch off automatically.
6.
The "
" symbol above "
7.
To stop the alarm ringing, press any button.
NOTE: The set timer procedure could be seen by pressing any function button repeatedly at any time.
NOTE: by adjusting the end time of cooking to the current time, the set timer procedure can be cancelled.

bURNER lOCATIONS

a.
Single cooking zone - 2200W (1)
b.
Single cooking zone - 1200W (2)
c.
Single cooking zone - 1800W (1)
d.
Power & Residual Heat Warning lights (4)
DESCRIPTION OF WARNING lIGHTS
Refer to Figure 16.
SETTING RANGE CONTROlS
1.
Turn the control knob to the desired position. Heat intensity goes from lOW on the right to HIGH on the left.
2.
Adjustment is continuous so the cooking zone will operate at any intermediate setting between low and high.
3.
Once the cooking zone is hot, the lED corresponding to the zone illuminates.
4.
To switch off the cooking zone turn the knob in either direction to the "OFF" position.
5.
The residual heat warning light remains illuminated when the temperature of the ceramic glass surface is
hot and will switch off once the surface temperature has cooled.
" button repeatedly until the "
" will flash and the alarm will ring.
" button repeatedly until the "
" flashes, and the alarm will ring.
" symbol above "
" symbol above "
" begins to flash.
" symbol above "
" symbol above "
" begins to flash.
b
a
back left
Front left
19
" flashes. Press " + " or " - "
" flashes. Press " + " or " - "
b
c
d
back Right
Front Right
Figure 15
Figure 16

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido