Make Electrical Connection - Magic Chef MCSCTE24BG Manual Del Usuario

4. Attach brackets to cooktop base bottom with bracket clamping screws using the bracket mounting holes.
Securely tighten screws.
a
b
c
Option 1:
Countertop is 1-1/8" (3cm) thick.
a. Cooktop
b. Cooktop Base
c. Clamping Screw
d. Clamping Bracket (It extends far enough beyond cooktop base to allow installation of clamping screws.)
e. Countertop
f. Foam Seal
g. Thickness of the Countertop

MAKE ELECTRICAL CONNECTION

WARNING: Electrical Shock Hazard
• Disconnect power before servicing.
• Use 8 gauge copper wire.
• Electrically ground cooktop.
• Failure to follow these instructions can result in death, fire, or electrical shock.
This cooktop is manufactured with a frame connected, green or bare ground wire. Connect the cooktop cable to
the junction box through the UL listed or CSA approved conduit connector.
Electrical Connection Options
If your home has
4-wire direct
5" (12.7 cm)
3-wire direct
3-1/2" (8.9 cm)
f
a
b
g
d e
Option 2:
Countertop is 1-9/16" (4cm) thick.
And you will be connecting to
A fused disconnect or circuit breaker box
A fused disconnect or circuit breaker box
f
a
g
b
c d e
to 3-Wire Cable from Cooktop (page 13)
to 3-Wire Cable from Cooktop (page 13)
12
f
c d
Option 3:
Countertop is 2" (5cm) thick.
Go to Section
4-Wire Cable from Power Supply
3-Wire Cable from Power Supply
Figure 6
g
e