PREPARATION
Before beginning installation of product, make sure all parts are present. Compare
parts with package contents list. If any part is missing or damaged, do not attempt to
install the product.
Estimated Assembly Time: 2 minutes
No tools required for assembly.
INSTALLATION INSTRUCTIONS
1.
Take off the trim (C) before installing.
Make sure the power is turned off at the source
to the recessed housing(s) where the fixture(s)
will be installed.
2.
Place the lamp replacement instructions (D)
inside the housing, NOTE: This label provides
information about replacing lamps.
Screw adaptor (A) into socket in recessed
housing.
1
2
D
Ceiling
A
Lowes.com
4
INSTALLATION INSTRUCTIONS
3.
Plug base cable connector on adaptor (A) into
lamp (B).
B
4.
Carefully route wires into fixture and push
recessed kit up flush to ceiling surface.
C
5.
Attach the trim (C) to the lamp.
3
Ceiling
B
4
Ceiling
5
Lowes.com
5
Ceiling
C