Inserting/changing batteries
In order to use the scales, you will need 4 batteries of type LR6 (AA), 1.5 V (included).
The battery compartment is located on the underside of the device.
1. Slide the battery compartment cover in the direction indicated by the embossed
arrow until it stops, then remove it.
2. Insert the batteries as shown on the base of the battery compartment. Pay attention
to the correct polarity (+/-).
Pay attention to the correct polarity (+/-).
3. Put the battery compartment cover back in place and slide it towards the middle of
the scales until it stops.
Notes on changing the battery:
A change of batteries becomes necessary when "LO" appears on the
Only use the type of battery that is specified in the "Technical Data".
Always change all batteries at the same time.
Dispose of batteries in an environmentally appropriate way (see
Operation
Weighing
1. Place the scales on an even, firm, and dry surface. Carefully position the scales in
order to avoid hard impacts to the sensors/feet and therefore to avoid damage.
2. Switch the scales on by briefly tapping on TARE. "HELLO" will be shown on the
display.
3. Choose the desired unit of measurement by repeatedly touching MODE. You can
choose between "g" (grams), "oz" (ounces) and "lboz" (pounds). Pay attention to the
indicator on the display.
4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in
point 6.
5. Press TARE.
Depending on the chosen measuring unit, "0 g", "0.00 oz" or "0: 00 lboz" will be
shown on the display.
6. Put the substance to be weighed in the container or place it on the weighing
surface. The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.
Kitchen Scales KE 1601
Druckbuch LADINA.indb 17
display, or when nothing at all is displayed.
"Disposal")
Inserting/changing batteries
05.02.2016 12:14:28
17