Power Specifications; Environmental Specifications; Acoustic Specifications - HP DesignJet T1700 Información De Introducción

For more information, visit http://www.hp.com/go/designjetmobility.
Enable email printing
1. Make sure that your printer is correctly connected to the Internet.
2.
At the front panel, tap
If HP ePrint is enabled, the status and assigned printer email address will appear in the Connectivity
●
application.
●
If HP ePrint is not enabled, tap
3. This is an optional step: If you are the printer administrator, log in at HP Connected
(http://www.hpconnected.com) to customize your printer's email address or manage the printer's security for
remote printing.
For the latest information, support, and terms of use of HP Connected see
your region's availability).
Power specifications
Power
Frequency
Input voltage
Maximum current
Environmental specifications
Operating temperature
Recommended operating temperature
Storage temperature
Recommended operating humidity
Storage humidity
Acoustic specifications
Printing acoustic pressure
Printing acoustic power
Ready acoustic pressure
Ready acoustic power
ENWW
, then Services.
, then Services > HP ePrint > HP ePrint connectivity > Enable.
100 W
50/60 Hz
100–240 V ac ±10%, auto-ranging
2 A
5 to 40°C (41 to 104°F)
15 to 35°C (59 to 95°F), depending on paper type
−25 to 55°C (−13 to 131°F)
20 to 80% RH, depending on paper type
0 to 95% RH
45 dB(A)
6.1 B(A)
32 dB(A)
5.0 B(A)
http://www.hpconnected.com
Enable email printing
(check
7