Display And Keypad - Adam Equipment PMB 53 Manual Del Operador

4.0 DISPLAY
The LCD has unique symbols to indicate the following:
0
Note: Some symbols shown on the display are not used in the analyzers.
During the moisture test the main display will show the percent moisture. It
can be switched to other values using the [Dspl/] key. For example current
mass.
The secondary display will show the elapsed time and temperature during a
test.
Typical Displays that would be used are:
12
| P a g e
KEYPAD
AND
Net
Zero
Stable
Net weight
A bar graph indicating the proportion of
the analyzer capacity being used by the
weight on the pan
Weighing:
Showing no weight on the pan,
stable and at zero point.
© Adam Equipment Company 2017