Adam Equipment PMB 53 Manual Del Operador página 67

Temperature
chamber
Temperature
profile
I/O
Stored Test
Setting
Stored Test
results
Data Output
Beeper
Language
RTC
Calibration
Power
Fuse
Environment
65
| P a g e
Rapid option for Single and Step methods, 130% target for
RS-232 Bi-directional Serial port
1 Default setting, 49 User Settings
Stored by number and alpha/numeric name
Up to 99 test results stored by name
Ability to send data out via RS232 or USB Serial port.
Ability to store test results and test settings to USB memory
device using USB Host interface.
To sound when keys are pressed or to announce end of a
test, independently enable/disable
English, German, French or Spanish
Date formats, YMD, DMY, MDY
Manual calibration using external mass
20 or 50g
Factory set, 115VAC or 230VAC, 50-60Hz., 400 watt.
5A, time lag, High Breaking capacity, 5 x20mm
0ºC to 40ºC, up to 90% RH. non-condensing
50 -160C
set in 1C steps
Standard (one step)
Step, up to 3 temperatures
Ramp, vs. time
3 minutes at start of test.
USB Serial Output
USB HUB Serial interface
Real Time Clock
Time 24 hour clock
50 or 150g
© Adam Equipment Company 2017
100 or 200g