Install The Camera On A Bracket Mount (Sold Separately) - Axis P55 Serie Guia De Instalacion

AXIS P55 Network Camera Series
1.
Ceiling tile
2.
Ceiling bracket
3.
Safety wire
10. Slide the unit holders on the network camera into the slots on the mounting plate and
rotate the camera unit
11. Install the ceiling tile, with the camera mounted, into the ceiling.
12. Place the trim ring over the ceiling bracket and snap it into place.
1.
Trim ring

Install the Camera on a Bracket Mount (sold separately)

WARNING
• Risk of electric shock. The product shall be grounded using a grounding wire. Make sure
both ends of the grounding wire are in contact with their respective grounding surfaces.
1. Install the bracket (not included) according to the instructions supplied with the bracket.
If drilling is required, make sure to use drill bits, screws and plugs that are appropriate
for the material. See www.axis.com for information on available mounting accessories.
2. Secure the camera using the supplied safety wire.
3. Loosen the camera base lid screws and remove the camera base lid.
20