Kenmore 116.30412 Manual Del Propietário página 17

TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is changed,
The agitator must be cleaned according to
the following schedule:
Vacuum Use
HEAVY
(used daily)
MODERATE
(used 2-3 times/week)
_itator
every week
every month
LIGHT
(used 1 time/week)
every 2 months
Remove ant dirt or derbris in the belt path
area or in the agitator area.
Exploded View - Agitator
Assembly
End l
Cap Belt
End
Pulley Cap
End Cap
Carefully remove
the brush end
caps and remove
any string or
debris located on
the agitator
assembly, end
caps, washers or
agitator shaft,
NOTE: Replace the end caps. See the
exploded view for correct assembly,
TO REPLACE BELT
Make sure that the carpeVbare floor selec-
tor is in the carpet position.
Loop the new belt on the motor shaft.
Motor
Shaft
Carpet/Bare Floor
Pulley Belt Selector Shaft
BELT ROUTING
Correct Routing of Belt
(Selector In Carpet-Position)
Agitato_
[__. C arpet[Bare
t-mor Pedal
Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
_'_--7_._ .; _." . Carpet/Bare
Agit_tto_J "-M_ior
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector In Bare Floor Position)
_" 'B
/ ,_ Carpe_ are
/' , [] Fioor Pedai
Agitator _,,l_ Ca et/Bare Floor
.... _sr_elector Shaft
17