Always follow all safety precautions when
cleaning and servicing the vacuum
cleaner.
•
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury
from cleaner suddenly starting.
tf the cleaner does not seem to have ade-
quate suction, first check If the dust bag is
full or if a filter is clogged. See DUST
BAG CHANGING and FILTER CHANG-
ING_
If the bag and filter areas are free of
clogs, check the hose area. Remove the
lower end of the stretch hose from the
cleaner by grasping the hose collar, twist-
ing, and pulling straight out.
Plug in the
vacuum and
turn it on.
Stretch the
hose to
maximum
length and
then allow
the hose to
return to its
storage
Stretch
length,
Hose In
and Out
"['urnthe unit
off and
unplug the
unit.
Visually inspect the hose and the base
area into which the hose is inserted°
Remove any visible clog.
Re-insert the hose into the opening on
the lower body from which it was
removed. Press firmly to assure
connection.
Stretch
Hose
Hose
Collar
•
WARNING
Personal Injury Hazard
DO NOT place hands or feet
underneath the unit at any time.
The agitator will be revolving
rapidly when the vacuum is turned
on and Is in the carpet setting.
If the bag and filter areas and the hose
areas are free of clogs, check the nozzle
area. To check
this area, see the section
on BELT CHANGING
AND AGITATOR
CLEANING,
Return the cleaner to the upright position
before plugging into an electrical cutlet.
19