Performance Indicator - Kenmore 116.30412 Manual Del Propietário

Carpet edges
Guide either side or the front of the noz-
zle along a baseboard. The full length
brushes help remove dirt at carpet edges.
Stairs
Put handle in full upright position_ Place
the carpet/bare floor selector in the bare
floor position. Use the crevice tool or fab-
ric brush. Set the On!Off switch to ON.
Personal Injury Hazard
Use care if vacuum cleaner is
placed on stairs. If it falls, person-
al injury or property damage could
result.
For best clean-
ing results,
keep the air-
flow passage
clear.
Occasionally,
check each of
the areas indi-
cated for clogs.
Unplug the
cleaner from
the outlet before checking.
MOTOR PROTECTION
SYSTEM
This vacuum has a motor protector by-
pass valve which automatically opens to
provide cooling air to the motor when a
clog prevents the normal flow of air to the
motor. If the by-pass valve opens to
prevent motor overheating and possible
damage to the vacuum, you will notice a
change of sound
as air rushes
through the valve
opening.
NOTE: Do not
block motor
protector
To correct
problem: See
the TROUBLE-
SHOOTING
chart.
Protector
NOTE: The motor protector may open
when using attachments or when cleaning
new carpet, due to reduced airflow by the
attachments themselves or by new carpet
fuzz filling the bag quickly, See the
TROUBLESHOOTING section°
PERFORMANCE INDICATOR
SOME MODELS
When the unit is running with normal air
flow, the light on the performance indicator
is off. The light comes on whenever the
airflow becomes blocked. If that occurs,
check the disposable dust bag, motor
safety filter and other possible clog
locations shown In CLOG REMOVAL
To correct
problem:
See the
TROUBLE-
SHOOTING
chart.
NOTE: The
light may
also come on
when using
attachments,
due to
reduced
airflow
through the
attachment.
11