Description; Specifications - Campbell Hausfeld CHN70600 Manual De Instrucciones Y Lista De Piezas

Operating Instructions and Parts Manual
Angle Finish Nailer

Description

This nailer is designed for decorative trim, molding, window and door casings,
furniture trim, door jamb installation, and picture frame assembly. Features include:
convenient rear loading magazine which holds up to 100 nails, tethered no-mar tip
with stud finder function, quick clear nose, an adjustable depth of drive mechanism,
oil free, electronic low nail indicator, nail placement laser pointer, in-line magazine,
bubble level, anti-dry fire, conversion trigger with safety lockout, rubber comfort grip,
swivel plug, and adjustable exhaust.
Figure 1 - CHN70600 Angle Finish Nailer

Specifications

Model CHN70600
Requires: 1.0 Avg SCFM
using 10 fasteners per
minute at 90 psi
Air Inlet: 1/4 inch NPT
Fastener Size Range:
1 inch to 2-1/2 inch 15g
35° D-clipped head angle
finish nails
Magazine Capacity:
110 fasteners per load
Weight: 5 lbs., 8 oz.
Length: 14 inches
Height: 13 inches
Maximum Pressure:
120 psi
Pressure Range:
70 psi to 120 psi
Batteries: Two (2) AAA
Laser: Class IIIA
Wavelength:
640 nm - 660 nm
Radiant Power:
1.53 < 5 mW
Locate model number and date code on
magazine and / or tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
Retain these numbers for future reference.
www.chpower.com
3