Replacing The Shaving Heads - Philips 9000 serie Manual De Instrucciones

20
English
Tip: For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.
Cleaning the beard styler attachment
Clean the beard styler attachment every time you have used it.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the centre to pull it off the beard styler
attachment. Do not pull at the sides of the comb (Fig. 30).
2 Switch on the appliance.
3 Rinse the beard styler attachment and the comb separately under
a warm tap (Fig. 49).
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let the beard styler
attachment and comb dry.
6 For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.
Storage
1 Store the appliance in the pouch supplied.
Note: Make sure the appliance is dry before you store it in the
pouch.
Replacement

Replacing the shaving heads

For maximum shaving performance, we advise you to replace the
shaving heads every two years (Fig. 51). Replace damaged shaving
heads immediately. Always replace the shaving heads with original
Philips shaving heads (see 'Ordering accessories').
Replacement reminder
The replacement reminder indicates that the shaving heads need to
be replaced.The shaving unit symbol lights up continuously, the
arrows flash white and you hear a beep when you switch off the
shaver (Fig. 11).
1 Switch off the appliance.