Wiring Instructions - iGuzzini LMS QUICK Manual De Instrucciones

DISABLING BEEP FROM KEYPAD
Hold down the following keys. Do as above to restart the beep sound.

Wiring instructions


Use a 24Vdc ballast to power the Master LMS QUICK keypad.

Connect lamps and peripherals to the DALI.

Connect the IR USB PC interface.

Use software LMS QUICK Manager for installation and configuration purposes.

Read the software Manual.

Limitations:

Connect max 3 RGB/RGBW groups

GROUP D must be monochromatic

RGB LED, RGB fluorescent and RGBW fluorescent lamps must belong to separate groups
Follow the rule on the control of overall loads
29