1
Operation und use
[1]
Push the telescopic tube with an easy
[2]
turn on to the handle of the flexible
suchtion hose. The telescopic tube can
be adjusted to the required length.
[3]
Push the swivelling floor nozzle with
an easy turn on to the telescopic tube.
[4]
Push the suction hose into the opening
of the suction socket until it snaps in
audibly. Press the release button at the
side of the suction hose and pull out the
suction hose.
[5]
Pull out the cable to the required length.
[6]
The cable is automatically rewind
when you press the cable button.
However, this should only be done when
the plug has been removed from the
wall socket.
[7]
By pressing the switch button the vacu-
um cleaner is switched on and off.
Floor nozzle settings for carpets and
tiled, wood-block or similar floors:
[8]
Carpets
[9]
Hard floors = brush bar extended
[10] Press the release button ...
[11] ... the cover of the accessory compart-
ment is opening automatically - and
take out the necessary accessory. Then
close the cover until it snaps in with an
audible click.
[12] The crevice nozzle is an effective
attachment for vacuuming deep slots in
upholstery, skirting boards, ledges, cor-
ners etc.
= brush bar retracted
13