Before First Use; Installation Location - Listo CAL 145-55b3 Instrucciones De Uso

• Remove the shipping box.
• Check that the appliance has not been damaged during transport. Do not plug
in a damaged appliance under any circumstances! If the appliance is damaged,
please contact your retailer.
• Remove all adhesive tape and packaging materials from the inside and outside
of the appliance. Take out any accessories (ice cube tray, scraper, etc.) supplied
with the device.
b
efore first use
• Clean the inside of the appliance and any accessories with lukewarm water with
a little white vinegar added to it. Do not use soap or detergent as the odour may
linger. After cleaning, completely dry the appliance.
• You can use white spirit to remove any remaining adhesive from the outside of
the appliance.
• To clean the appliance, always turn it off and unplug it, or remove the fuses or flip
the circuit breaker to the off position.
i
nstAllAtion loCAtion
• This refrigeration appliance is not intended to be used as a built-in appliance.
• Place your freezer on a stable, level surface. Your appliance will be heavy when
loaded with food: it must, therefore, be placed on a strong, solid floor.
• The appliance must be installed in a dry, well-ventilated room at ambient
temperature (16°C minimum and 38°C maximum). Leave a space of at least 10
cm around the appliance.
• Never place an appliance that emits heat (microwaves, toasters, etc.) on the
freezer.
• The appliance must not be exposed to direct sunlight.
• The appliance must not be exposed to rain.
• The appliance must not be installed next to a radiator, a stove or any other heat
source.
• The appliance's energy consumption and efficient operation are affected by the
room temperature.
• The appliance must be installed so that the power outlet is accessible.
• Make sure that it is not resting on its power cable after installation.
V.1.0
UNPACKING
SET-UP
18