WEG SSW7000 Guía De Instalación, Configuración Y Operación página 4

Temperature Transducer Module IOE-04
To correctly install module IOE-04, follow the steps below:
Step 1: With the SSW7000 de-energized, remove the front cover (figure 2);
Step 2: Carefully plug-in the module into slots 1 and 2 (figure 3 (a));
Step 3: Place and tighten the fixing screw of the module (figure 3 (b));
Step 4: Connect the cables of the sensors in the XC1 and XC2 (IOE-04).
(a)
(a)
2 | SSW7000
Figure 2: Removal of the front cover
Figure 3: Installation of the optional module into slot
(b)
(b)
- English -
(c)
(c)