I. SAFETY INFORMATION
All safety procedures described in the manual must be followed.
II. GENERAL INFORMATION
This user guide provides information for installation, configuration and operation of
the optional module IOE-04. This module is used to connect temperature sensors
of the type PT100.
NOTE!
The IOE-04 module can be used only with the Soft-Starter SSW7000.
III. PACKAGE CONTENTS
Accessory module in anti-static packaging.
„
Installation, configuration and operation guide.
„
Fixing screw.
„
1. MODULE INSTALLATION
The optional board modules are installed directly into slots on the SSW7000 control
board C1.
Figure 1: Identification of slots of the optional modules
Temperature Transducer Module IOE-04
- slot 1: white
- slot 2: yellow
- slot 3: green
- English -
SSW7000 | 1