Product Setup - D-Link DES-1005D Guia De Instalacion

PRODUCT SETUP

SWITCH SET-UP
Internet Router
LED
DES-1005D/1008D
Step 1
Connecting the power adapter
Plug the power adapter into a free wall socket, then plug the other
end of the power adapter cable into the power port of the DES-
1005D/1008D. The power LED will light up, confirming that the
device is powered up successfully.
Step 2
Connecting your Network Devices
Use a LAN cable to connect your network device to one of the
Ethernet ports of DES-1005D or DES-1008D.
Step 3
Determine that the Switch is Powered On
The Power LED indicator light is green when the Switch is receiving
power; otherwise, it is off.
Determine that the Network Devices are Connected
The Link/Act LED indicator light is green when the port is connected to a
device.
The green indicator blinks as data is transmitted or received.
3