Guarantee - AEG SRR 4300 CD Instrucciones De Servicio/Garantía

Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the STOP key (18).
2. Press the PROG key (9). The number „01" (storage
location) fl ash in the display (12). The PROGRAM
control lamp (11) fl ashes. Use the I
(6/8) to select the desired track and then press the
PROG button (9) again. The display changes to
3. Select the next track with the I
press the PROG key (9) again. Repeat the procedure
until all the desired tracks are selected.
4. Press the / II CD play/pause button (16). The play-
back starts. The selected track numbers are shown
in the display in the correct order. The PROGRAM
control lamp (11) emits a fi xed light. Press this button
to pause briefl y the playback.
5. Press once the CD Stop key (18 ) to stop the
playback while retaining the program.
6. To listen to the program again, please press the
CD play/pause button (16).
7. To delete the program, press the
twice. The PROGRAM control lamp (11) goes off.
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
order remains in the memory until you select another
mode, e.g. TAPE, the CD is removed from the CD com-
partment or the machine is switched off.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the REPEAT button
(15) up to three times and then you can use the functions
as described under „REPEAT".
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibili-
ty and low voltage directives, and has been constructed
in accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or,
at our discretion, by replacing it. The guarantee services
do not entail an extension of the life of the guarantee nor
do they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
For repairs or replacement during the life of the guaran-
tee return the device in its original packing together with
the proof of purchase to your dealer.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
5....-05-SRR 4300 CD AEG 27
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are
to be paid!
The guarantee lapses in case of unauthorized tampering.
/ I buttons
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried
/ I key (6/8) and
by the competent dealer or repair service against the
payment of the ensuing costs.
/ II
CD Stop key (3)
27
05.02.2004, 9:30:16 Uhr