CT 119 Serie Manual Del Usuario página 4

4
TRACEABILITY
progressive number - month of manufacture - year of manufacture
5
SYMBOLS
5.1
5.6
5.11
5.1) Maximum permissible load; 5.2) Permissible thermometric range; 5.3) Maximum permissible
angle; 5.4) Do not perform repairs; 5.5) Check the integrity of the device before use; 5.6) Check
that the line recoils correctly; 5.7) Test the locking action by pulling the line; 5.8) Connect the de-
vice only to EN 795 anchor points; 5.9) Connect to an EN 361 fall arrest attachment point; 5.10)
Check the the minimum distance needed under the feet of the operator in order to avoid the col-
lision with the structure or the ground, in case of a fall; 5.11) Be careful of the pendulum effect;
5.12) Be careful of sharp edges. 5.13) Check that the swivel cannot move so far as to cover the
green load-indicator ring.
individual serial number
AAAA - MM - YYYY
5.2
STOP
5.7
5.12
30°
MAX
5.3
5.8
OK!
5.13
- 4 -
5.4
5.9
5.5
X
5.10