Bosch NITP668SUC Manual Del Usuario página 15

3. Within the next 10 seconds, set the required cooking
time using the number keys.
Touch the Cook Timer key to confirm the selected
4.
setting.
The cooking time begins to elapse.
Notes
The same cooking time can be set automatically for all
▯
elements. The set time for each of the elements counts
down independently.
You can find information on automatically
programming the cooking time in section on "Cook
timer".
If the flexible cooking zone is selected as the only
▯
element, the set time for the entire cooking zone is the
same.
If the Move function is selected for the combined
▯
cooking zone, the set time for the three elements is the
same.
Changing or deleting the time
Select the element and then touch the Cook Timer key.
Change the cooking time using the number keys or set
‹‹
to delete the programmed cooking time.
Touch the Cook Timer key to confirm the selected
setting.
When the time has elapsed
The element switches off, the
element switches to power level
sounds.
‹‹ V
and the indicator flash in the timer display.
y
When the symbol is touched, the indicators go out
and the acoustic signal ceases.
Notes
To set a cooking time of under 10 minutes, always
▯
touch 0 before you select the required value.
If a cooking time was set for several elements, the time
▯
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
▯
cooking time.
You can set a cooking time of up to
▯
y
display flashes and the
‹‹
. An acoustic signal
ŠŠ
minutes.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting procedure
Touch the Kitchen Timer key. The
1.
V indicator light up in the timer display.
2. Select the required time on the control panel and
touch the Kitchen Timer key to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the Kitchen Timer key.
Change the cooking time using the number keys or set
‹‹
to delete the programmed cooking time.
Touch the Kitchen Timer key to confirm the selected
setting.
When the time has elapsed
An audible signal sounds once the time has elapsed.
and the V symbol flash in the timer display.
The indicators go out after touching the Kitchen Timer
key.
Count-up timer function
The count-up timer function displays the time that has
elapsed since activation.
This functions independently from the elements and from
other settings. This function does not automatically
switch off an element.
Activating
Touch the Count Up Timer key. The
V
indicator light up in the timer display.
The time begins to count up.
Deactivating
Touching the Count Up Timer key the stopwatch
function. The timer displays remain lit.
If you touch the Count Up Timer key again, the displays
go out.
The function is deactivated.
‹‹
symbol and the
‹‹
‹‹
symbol and the
15