Publicidad
Idiomas disponibles
Idiomas disponibles
A:Amps
V:Voltage
4.Safety
This symbol adjacent to another symbol, terminal or
operating device indicates that the operator must refer
to an explanation in the Operating Instructions to
avoid personal injury or damage to the instrument.
This symbol advises the user that the terminal(s) so
marked must not be connected to a circuit point at
which the voltage with respect to earth ground exceeds
(in this case) 600 VAC or VDC.
This instrument has been designed for safe use, but
must be operated with caution. The rules listed below
must be carefully followed for safe operation.
•NEVER apply voltage or current to the meter that exceeds the
specified maximum:
•USE EXTREME CAUTION when working with high voltages.
•DO NOT measure voltage if the voltage on the "COM" input jack
exceeds 1000V above earth ground.
•ALWAYS turn off the power and disconnect the test leads before
opening the covers to replace the fuse or batter
•If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
•be impaired.
5.Electrical Characteristics
DC Voltage (Auto-ranging)
Range
Resolution
400.0mV
0.1mV
1mV
4.000V
10mV
40.00V
www.grupotemper.com
Pen-type Digital Multimeter
Accuracy
+/-1.2% of rdg ± 2 digits
KMDL-01
3
Publicidad
