☞ The method of entering data and changing settings is the same for all M-LINK sensors.
Overview of the possible set-up values and options for individual M-LINK sensors:
Sensor
Voltage sensor
Values
Address (U
)
1
and
Bottom alarm
options
Top alarm
Option
(min, max, Ø)
Option address
Address (U
)
2
Bottom alarm
Top alarm
Option
(min, max, Ø)
Option address
Explanation of terms:
Address:
Transmitter screen line at which the corresponding value is displayed.
Option:
Additional output of maximum, minimum or average value for the corresponding measurement channel
Bottom alarm: Lower alarm threshold, below which an alarm is to be triggered at the transmitter.
Top alarm:
Upper alarm threshold, above which an alarm is to be triggered at the transmitter.
Integration:
Time interval over which altitude changes are integrated -> period until a new altitude value is
calculated.
Display:
Selects the display of the option value Charge (current sensor 35A / 100A)
Available settings: battery capacity, residual capacity or discharged capacity.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de
Operating Instructions - MULTImate – V1.42
T2: Option
Max value
T2: Option Addr.
L
off
11-3 Send data
L
Current sensor
Rev-count sensor
35A / 100A
Address (I)
Address (RPM)
Bottom alarm
Bottom alarm
Top alarm
Top alarm
Option
Option
(min, max, Ø)
(min, max, Ø)
Option address
Option address
Address (Q)
Blade count
Battery capacity
Display
Alarm
Transfer settings to the sensor
•
sends the settings to the sensor
Rev-count sensor
(optical)
(magnetic)
Address (RPM)
Bottom alarm
Top alarm
Option
(min, max, Ø)
Option address
Magnet count
Vario / altitude-
Temperature
sensor
sensor
Address (Vario)
Address (T
Bottom alarm
Bottom alarm
Top alarm
Top alarm
Option
Option
(min, max)
(min, max, Ø)
Option address
Option address
Integration
Address (T
Address (altitude)
Bottom alarm
Top alarm
Top alarm
Bottom alarm
Option
(min, max, Ø)
Option
(min, max)
Option address
)
1
)
2
Seite 22/22