Klein Tools CL700 Manual De Instrucciones página 10

ENGLISH
AC CURRENT (LESS THAN 600A)
AC Current is measured by pressing the clamp trigger
the clamp and placing it around a current-carrying wire. When
3
measuring, care should be taken to ensure that the clamp
completely closed with trigger
passes perpendicularly through the center of the clamp
with the arrow markings with the arrow markings
To measure current:
1. Rotate the Function Selector switch
2. Place clamp
shown in the display. The meter will auto-range to display the
measurement in the most appropriate range.
Disconnect test leads when measuring with the clamp.
10
OPERATING INSTRUCTIONS
. .
11 11 11
around wire. The current measurement will be
3
fully released, and that the wire
10
to the AC current A
2
to open
10
is
3
in line
3
setting.