Intended Use; Improper Use; Product Description - EGAmaster AQUAMaster 79915 Manual De Instrucciones

Remark: Measurement acc. to DIN EN ISO 15744
(1)
Remark: Measurement acc. to DIN EN ISO 28927-5
(2)
The performance specifications are guide values only, they depend basically on the
application, the working pressure and the accessories used.
These machines are designed for commercial/industrial use only.
Only trained, skilled personnel are allowed to operate the machine.
The drill serves for drilling:
• Wood, plastic, non-ferrous metal, cast iron, steel and stainless steel It can be applied for:
• Chemical industry / refineries, nuclear industry, body construction and ship building industry,
construction. The drill can be used for underwater work as well. The machine must be held
tight against rotation.
Any use deviating from the intended use as described is considered to be improper use.
• Working without personal protection equipment.
• Using the machine in an inadmissible area.
• Drilling self-flammable material.
1 Valve trigger
2 Motor housing
3 Hydraulic connection (P)
4 Hydraulic connection (T)
5 Gear housing
6 Adjusting sleeve
36

INTENDED USE

IMPROPER USE

PRODUCT DESCRIPTION

Fig. 1
7
8
9
10 Flush connection
11 Depth gauge
Measurement uncertainty K: 3 dB (A)
Measurement uncertainty K:1.5 m/s
Sliding sleeve
Shank
Second Handle
2