Hydas 2222 Instrucciones De Uso página 6

Before operating:
- Put seat massage mat on a solid subsurface (armchair, easy chair, car seat
etc.).
- Connect the connecting plug of the power supply (5) to the connecting
coupling (7) of the massage mat.
- Connect the 230 Volt plug of the power supply to the power supply system.
Before connecting the 230 Volt plug to the power supply system make
sure the seat massage mat is switched off.
5. Application
•
Sit on the seat massage mat relaxed and comfortable and make sure you
are sitting in centre. Your upper body and the thighs must have a
consistently good contact with the seat massage mat.
•
Switch the seat massage mat on by pressing the POWER (A) button.
After switching on, the device starts with programme 1 on the second
speed level. The corresponding LEDs light up.
•
Should you request a programme-controlled massage, select the requested
programme (1-4) by means of the PROGRAM (C) button. The related LED
lights up.
•
The respectively selected programme is additionally adjustable in three
levels by the SPEED (B) button.
The four massage programmes offer different sequences of
massage zones and speeds.
Prog. 1:
The motors of the zones M1 – M4 work in steady alternation. The speed of the
alternations increases in four levels and then starts again.
Prog. 2:
The motors of the zones M1 – M4 work in steady alternation as a wave massage
(M1 starts, after alternation to M2, M1 fades out slowly, after alternation to M3, M2
fades out slowly, etc.)
Prog. 3:
Pulsating massage = M1+M2 M2+M3 M3+M4 M4+M1 , etc.
11
Prog. 4:
The motors of the zones M1 – M4 work at the same time. They start on the lowest
level, then slowly increase the speed and then fade out slowly. After a pause of
about five seconds the process starts again.
Massage zones
Via the MASSAGE ZONE (E) - buttons M1 – M4 the zones can respectively set
separately or in any combination. The control-LEDs of the selected zones light up.
The massage speed can be selected in three levels by means of the SPEED (B)
button.
Heat
By pressing the HEAT (D) button, the heat function is switched on or off. The heat
can be used in addition to massage or separately as well.
Application in the car
The seat massage mat can be used in the car as well. For this purpose, please
apply the enclosed car adapter. Plug the connecting plug of the car adapter into the
connecting coupling of the seat massage mat. Plug the car adapter into the plug
socket of the cigarette lighter or an alternative 12V-socket (e.g. boot). The
application is carried out as described before.
Do not use the seat massage mat if driving your car by yourself. The
massage can distract from road traffic. The attention in road traffic must
not be impaired by the device. Only apply the device during a stop or as
a fellow passenger.
Automatic shutoff
For your security, the seat massage mat is provided with an automatic shutoff
system. After 30 minutes, all functions switch off automatically.
6. Cleaning and safekeeping
Cleaning:
Pull power plug after switching off of seat massage mat and wait until the device
has cooled down. Only clean seat massage mat and the operating element by
means of a soft, damp cloth. For this purpose you can apply a mild cleaning agent.
Do not wash !
Do not iron !
Safekeeping:
Keep seat massage mat at a dry, cool place.
Avoid contact with sharp objects that could damage the seat massage mat or make
holes in it.
Do not bleach ! Do not dry!
No dry cleaning !
12