RIDGID 1610RVM0 Manual Del Usuario página 28

Drum/Caddy Assembly (continued)
7. Insert the Caster Stem into the Socket
of the Caster Foot as shown.
(Front casters only).
8. Push on the Caster until the Ball on
the Caster Stem is inserted all the
way into the Socket. You will be able
to hear the Ball Snap into the Socket
and the Caster will swivel easily when
positioning is correct.
Caster
Caster Stem
Caster Ball
Socket
SP7094 1610RVM S/E_1610RVM-SE.indd 28
9. Rotate Drum/Caddy Assembly upright,
using a long Phillips Screwdriver,
install (8) #10 x 19 mm (3/4") Screws
into matching holes on both right and
left side of Caddy. Tighten Screws
until just snug. Do not over tighten as
this may tend to deform the Caddies.
#10 x 19 mm (3/4")
Screws (8)
28
2/3/19 7:11 AM