Emptying The Drum; Moving The Wet/Dry Vac - RIDGID 1610RVM0 Manual Del Usuario

Operation (continued)

Emptying the Drum

WARNING:
To reduce the risk of injury from
accidental starting, unplug power
cord before emptying the drum.
1. The Vac comes equipped with a Drain
for easy emptying of liquids. Simply
unscrew the Drain Cap and lift the
opposite side slightly to empty the
Drum.
2. Another option is to remove the
Powerhead Assembly.
3. Lay Powerhead Assembly aside on
a clean area while emptying Drum.
4. Dump the Drum contents into the
proper waste disposal container.
WARNING:
To reduce the risk of back injury
or falls, do not lift a Vac heavy
with liquid or debris. Scoop or drain
enough contents out to make the
Vac light enough to lift comfortably.
Powerhead
Assembly
Latches (2)
Drain
Cap
SP7094 1610RVM S/E_1610RVM-SE.indd 33

Moving the Wet/Dry Vac

Should it become necessary to pick
the Vac up to move it, the Handles
on each side of the Dust Drum and
Powerhead Carry Handle are used to lift.
To maneuver the Vac, the Metal Handle
in the rear of the Vac should be used.
Metal
Handle
Powerhead
Carry
Handle
Drum Handles (2)
33
2/3/19 7:11 AM