AXXAIR SAXX-200 Manual De Instrucciones página 57

INNOVATIVE ORBITAL SOLUTIONS
Access to electrode,
gas and wire
parameters
Join experience
Direct access to
welding
parameters
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Recap chart
Below you have the program list using these
commons parameters.
Here, one program has been created, its name is
"tube-tube".
Select an empty place to add a new program.
Pass name: enter the name you want or press the
« choice » button to select a name in the list.
Choose welding mode :
- Tacking : to do only one welding tack (no
movement)
- Fusion (+ wire): to do an orbital welding with
or without wire feeding
- Slope fusion : As Fusion but there is only one
level and the
progressively all along this level.
- Tacking auto: To do automatically 4 or 8 tack
welds
- Tacking auto + fusion (+wire) : To do
automatically 4 or 8 tack welds and after an
orbital welding
Choose number of level (number of division of the
360°)
Direct saving with
parameters.
Electrode parameters and arc lentgh.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 57 -
English
high current decreases
auto-calculated