Battery; Software Update - AXXAIR SAXX-200 Manual De Instrucciones

INNOVATIVE ORBITAL SOLUTIONS

7. Battery

Power source integrates a rechargeable battery to save programs and configurations. When the power
source is switched on, the battery is charging. If power source stays for too long (> 3 months) without
being switched on, battery may be empty. When you will switch it on with empty battery, it will
automatically load data from USB key (start will be longer than usual). This is why it is strongly
recommended to regularly export data from the screen to the USB key (cf §4.6) and to keep the USB key
on the power source. Power source can be used normally if battery empty, however if you add or modify
a program, you will have to export data from screen to USB key before switching off the power source. At
the next switch on, data will be automatically imported from USB key. This battery can not be changed
without an important operation inside power source: contact AXXAIR.

8. Software update

1) Following the update you will made, AXXAIR will inform you if you can keep your programs and
configuration. In all the cases, the first operation to do is to save data of your power source into
USB key (see §4.6).
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Empty battery icon
Importing data from USB key
Export data from screen to USB key.
When finished, switch off power
source or press this button and wait
for the message: USB key not
connected.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 78 -
English