Premium Rack Processor Parameters - Yamaha CL5 Manual De Referencia

Ocultar thumbs Ver también para CL5:
Tabla de contenido

Publicidad

Parameter
Range
LIM.ATK
0-120 ms
Attack time of the limiter
LIM.REL
Release time of the limiter
*1
LIM.KNEE
0-5
Knee of the limiter
LIM.BYP
OFF/ON
Bypasses the limiter
Positive (+) values lower the threshold of the high band and raise the
PRESENCE
-10 to +10
threshold of the low band. Negative (-) values do the opposite. If this is
set to 0, the high, mid, and low bands will be affected in the same way.
LOOKUP
0.0-100.0 ms
Lookup delay
MAKE UP
OFF/ON
Automatically adjusts the output level
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
 M.BAND COMP
Two input, two output 3-band compressor, with individual solo and gain reduction metering for
each band.
Parameter
Range
L-M XOVER
21.2 Hz-8.00 kHz
Crossover frequency between the low and mid bands
M-H XOVER 21.2 Hz-8.00 kHz
Crossover frequency between the mid and high bands
SLOPE
-6 dB, -12 dB
Filter slope
LOW GAIN
-12.0 dB to +12.0 dB
Low band gain
MID GAIN
-12.0 dB to +12.0 dB
Mid band gain
HI. GAIN
-12.0 dB to +12.0 dB
High band gain
TOTAL
-72.0 dB to +12.0 dB
Overall gain
CEILING
-6.0 dB to 0.0 dB, OFF
Restricts the output so that it will not exceed the specified level
LOW THRE
-54.0 dB to 0.0 dB
Threshold of the low band compressor
LOW RAT
1:1 to 20:1
Ratio of the low band compressor
LOW ATK
0-120 ms
Attack time of the low band compressor
*1
LOW REL
Release time of the low band compressor
LOW KNEE
0-5
Knee of the low band compressor
LOW BYP
OFF/ON
Bypasses the low band compressor
MID THRE
-54.0 dB to 0.0 dB
Threshold of the mid band compressor
MID RAT
1:1 to 20:1
Ratio of the mid band compressor
MID ATK
0-120 ms
Attack time of the mid band compressor
MID REL
*1
Release time of the mid band compressor
MID KNEE
0-5
Knee of the mid band compressor
MID BYP
OFF/ON
Bypasses the mid band compressor
HI. THRE
-54.0 dB to 0.0 dB
Threshold of the high band compressor
HI. RAT
1:1 to 20:1
Ratio of the high band compressor
HI. ATK
0-120 ms
Attack time of the high band compressor
HI. RAT
Release time of the high band compressor
*1
HI. KNEE
0-5
Knee of the high band compressor
HI. BYP
OFF/ON
Bypasses the high band compressor
LOOKUP
0.0-100.0 ms
Lookup delay
MAKE UP
OFF/ON
Automatically adjusts the output level
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
Description
Description
20

Premium Rack Processor Parameters

 Portico5033
This models an analog 5-band EQ made by the RND company.
Parameter
Range
Turns bypass on/off for the EQ. Even in the bypassed state, the signal will
ALL BYPASS OFF, ON
pass through the input/output transformers and the amp circuit.
TRIM
-12.0 to 12.0 dB
Input gain
LF FREQ
30.00 to 300.0 Hz
Center frequency of the LF band
LF GAIN
-12.0 to 12.0 dB
Gain of the LF band
LMF IN
OFF, ON
Switches the LMF band on/off
LMF Q
0.70 to 5.00
Q of the LMF band
LMF FREQ
50.00 to 400.0 Hz
Center frequency of the LMF band
LMF GAIN
-12.0 to 12.0 dB
Gain of the LMF band
MF IN
OFF, ON
Switches the MF band on/off
MF Q
0.70 to 5.00
Q of the MF band
MF FREQ
330.0 to 2500 Hz
Center frequency of the MF band
MF GAIN
-12.0 to 12.0 dB
Gain of the MF band
HMF IN
OFF, ON
Switches the HMF band on/off
HMF Q
0.70 to 5.00
Q of the HMF band
HMF FREQ
1.80k to 16.0k Hz
Center frequency of the HMF band
HMF GAIN
-12.0 to 12.0 dB
Gain of the HMF band
LF/HF IN
OFF, ON
Switches the LF/HF bands on/off
HF FREQ
2.50k to 25.0k Hz
Center frequency of the HF band
HF GAIN
-12.0 to 12.0 dB
Gain of the HF band
 Portico5043
This models an analog compressor/limiter made by the RND company.
Parameter
Range
Turns bypass on/off for the compressor. When bypassed, the button will
IN
OFF, ON
be unlit. However even in the bypassed state, the signal will pass through
the input/output transformers and the amp circuit.
FB
OFF, ON
Switches between feed-forward type and feed-back type
THRESHOLD
-50.0 to 0.0 dB
Threshold level
RATIO
1.10 : 1 to 28.9 : 1, LIMIT Compression ratio
ATTACK
20 to 75 ms
Attack time
RELEASE
100 ms to 2.50 sec
Release time
GAIN
-6.0 to 20.0 dB
Output level
Description
Description
Data List

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Cl3Cl1

Tabla de contenido