Set The Temperature - Singer SteamLogic Manual De Instrucciones

1. This appliance is designed to use normal tap water. Use of other liquids may damage
the appliance.
2. Plug in the appliance to an appropriate electrical outlet.
temperature has been reached and the iron is ready for use.
4. Always unplug the appliance after use.
FILL THE WATER TANK
1. Unplug the Power Cord from electrical outlet.
4. Close the Water Tank Door.
5. Plug in Power Cord to electrical outlet and turn
the Temperature Control Dial to the right to
switch on the appliance.
IMPORTANT: Never add fabric conditioner, starches or any other chemicals to water in your

SET THE TEMPERATURE

The appliance has different temperature settings to handle different fabrics. Turn the
Temperature Control Dial to the right to switch the appliance on. The appliance will start
•
•••
Turn the Temperature Control Dial to the Left to decrease ironing temperature from
INCREASE TEMPERATURE:
Turn Temperature
Control Dial to the Right
Using Your SteamLogic Steam Iron
••• •• •
•
DECREASE TEMPERATURE:
Turn Temperature
Control Dial to the Left
ENGLISH – 5
••