Selecting The Temperature; Dry Ironing; Steam Ironing - Singer Perfect Finish Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Selecting the Temperature

CONSULT The gArmeNT'S LABeL FOr TemPerATUre INSTrUCTIONS.
We reCOmmeND USINg The ChArT BeLOW AS A gUIDe.
Temperature Control Settings
acetate
elastane
polyamide
polypropylene
Plug the iron into a grounded electrical outlet.
Turn the iron on by pressing the Temperature Control Button. The
Temperature Display Light will flash with an audible beep sound.
To adjust the temperature settings, press the Temperature Control Button
repeatedly until the desired temperature setting is lit.
The Temperature Indicator Light will flash to indicate the iron is heating up or
cooling down.
When the selected temperature is reached, the Temperature Display Light will
stop flashing and an audible beep will sound. The iron is ready to use.
Turning the Iron Off
To turn the iron off, press and hold the Temperature Control Button for 3
seconds. The Temperature Display Light will turn off and an audible beep
will sound.
6
polyester
cotton
silk
linen
triacetate
viscose
wool
or
MAX
IRONING YOuR GARMENTS

Dry Ironing

To iron without steam, turn the variable Steam Control Dial to the "no steam"
position
.
Turn the iron on by pressing the Temperature Control Button. The
Temperature Indicator Light will flash with an audible beep sound.
Select the desired temperature.
To iron garments with a dry iron, SINger recommends using this iron with an
empty water tank.

Steam Ironing

WARNING: Never IrON Or STeAm CLOTheS WhILe TheY Are BeINg
WOrN. Never DIreCT The STeAm JeT AT PeOPLe Or ANImALS.
Fill the water tank as described in "Filling the Water Tank" section.
Turn the iron on by pressing the Temperature Control Button. The
Temperature Display Light will flash with an audible beep sound.
Select the
or
MAX temperature setting by pressing the Temperature
Control Button.
When the selected temperature is reached, the Temperature Display Light will
stop flashing and an audible beep will sound. The iron is ready to use.
Select the desired steam pressure on the variable Steam Control Dial to the
position.
TIP: The tougher the wrinkle, the more steam you will need.
dry iron setting
steam iron setting
7

Publicidad

Tabla de contenido
loading

Tabla de contenido