IKEA GENOMDRIVA Manual De Instrucciones página 9

ENGLISH
Grease filter maintenance:
1. Disconnect the hood from the
electric power supply.
2. Remove the grease filters: pull
the spring release handle
downwards, then remove the
filter.
3. After cleaning the grease filter,
remount in reverse order
ensuring the entire extraction
surface is covered.
LED Lamp maintenance
The hood is equipped with a lighting
system based on LED technology.
The LEDs guarantee an optimum
lighting, a duration up to 10 times
as long as the traditional lamps and
allow to save 90% electrical energy.
For replacement:
Use a LED Bulb with E26 base and
9W.
Turn off the range hood and allow
the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover
and remove it from the hood.
3. Screw light bulb into socket.
4. Replace lens cover by squeezing
cover and inserting tabs into
slots.
5. Reconnect power.
If new light does not operate, make
sure the lamp is inserted correctly
before calling service.
NOTE: As an alternative the hood
can use an incandescent bulb of
your choice, as long as the bulb has
E26 base and doesn't exceed 75W.
9