Label; Presentation - Chauvin Arnoux F11N Manual De Funcionamiento

1. LABEL

Five adhesive labels are supplied with your multimeter
clamp. Choose the label in your language and, above all,
do not forget to stick it on the back of the clamp.
This label contains a reminder of the main functions of
your clamp and the maximum values which should not be
exceeded.

2. PRESENTATION

The F11N and F13N multimeter clamps have 4,000
measurement points with automatic calibre selection.
These correspond to the inspection and maintenance
requirements on all types of low-voltage electrical
equipment. Their perfect ergonomics mean that these
instruments are very simple to use.
They directly measure AC intensities, without opening the
circuit, in total safety :
 The F11N only for sinusoidal voltages and currents.
 The F13N gives the RMS value for any distorted or
sinusoidal current and voltage.
Their common functions :
- AC currents up to 700A,
- DC and AC voltages up to 600V,
- max value of current and voltage,
- resistances up to 4k,
- continuity sound test,
- diode test,
- memory.
The specifi c function of the F13N :
- frequencies up to 4kHz.
Designed for professionals, these clamps meet the strictest
safety criteria and international standards, particularly :
- IEC 61010-1 and IEC 61010-2-032.
See Chapter 12 - General characteristics
16