Indicators - Sony VPL-PHZ60 Guía De Configuración

Indicators

You can check the projector status or abnormality by checking the lighting/flashing status of the ON/
STANDBY indicator and WARNING indicator on the top. If the indicators flash in red, address the problem
in accordance with "Warning indication and remedies" (page 47).
Status indication
Indicator status
(Off) (Lights in red)
(Off) (Flashes in green)
(Off) (Lights in green)
(Off) (Lights in orange)
46
GB
Indicators
Top of the unit
Operating status Description
Standby The power is supplied to the projector and the projector is in a
standby mode according to the setting.
Warm-up The projector is warming up after it is turned on.
Power on The projector is ready for projection.
Other standby The projector is in With No Input (Light Cutoff) or the speaker
status setting is set to "Always On."