Activating Internal Speaker On/Off (Sp); Speaker Volume Output Adjustment (T.vol) - Pioneer Super Tuner III MEH-P7150 Manual De Operación

DFS Alarm Function

Activating Internal Speaker ON/OFF (SP)

This feature allows you to select whether or not the speaker output is sounded when the
"DFS Alarm" is triggered. Initially from the factory the speaker output is activated.
Toggling between 5, ∞ buttons allows you to deactivate or activate the "Internal
Speaker". If you switch the speaker output OFF, you can not change the "TEST MODE".

Speaker Volume Output Adjustment (T.VOL)

If the "Internal Speaker Output" has been selected then it is possible to adjust the volume
of the speaker output for when the Alarm is triggered. To adjust the volume you must
engage the "TEST MODE".
Note:
• If the "Internal Speaker Output" is selected, then this menu will not appear.
1. Select the "TEST MODE"
with the 3 button.
2. Press the 5 button to switch
the "TEST MODE" ON.
In this mode the speakers will
sound.
3. Decrease or increase the vol-
ume with the VOLUME.
Display shows 22 – 62.
4. After setting volume, switch
the "TEST MODE" OFF with
the ∞ button.
5. Cancel the "TEST MODE"
with the 2 button.
6. Press the FUNCTION button
to move to the next selection.
43