Remapping The Steering Wheel Control Buttons - Axxess BX-GM6 Instrucciones De Instalación Para La Pieza

Steering wheel audio control extra settings

Remapping the steering wheel control buttons

Let's say you have BX-GM6 initialized and you want to change the button
assignment for the steering wheel controls. For example, you would like
"Seek-Up" to be "Mute". Follow the steps below to remap the
steering wheel control buttons:
Note: Volume Up, Volume Down, and PTT (OnStar) cannot be remapped.
1) Turn the key to ignition and then turn the radio on.
2) Within the first 20 seconds, press and hold the "Volume-Up" button on the
steering wheel until the L.E.D. goes solid.
3) Release "Volume-Up", the L.E.D. will then go out; "Volume-Up"
has now been programmed.
4) Follow the list in the Button Assignment Legend, to reference the order in which
the steering wheel control buttons need to be programmed.
Note: If the next function on the list is not on the steering wheel, press
"Volume-Up" for 1 second until the L.E.D. comes on, and then release
"Volume-Up". This will tell the BX-GM6 that this function is not available and
it will move on to the next function.
5) To complete the remapping process, press and hold the "Volume-Up" button on
the steering wheel until the L.E.D. in the BX-GM6 goes out.
BX-GM6
Button assignment legend
1. Volume-Up
2. Volume-Down
3. Seek-Up/Next
4. Seek-Down/Prev
5. Source/Mode
6. Mute
7. Preset-Up
8. Preset-Down
9. Power
Note: Not all radios will have all of these commands. Please refer to the owner's
manual provided with the radio, or contact the radio vendor directly for specific
commands recognized by that particular radio.
8
10. Band
11. Play/Enter
12. PTT (Push to Talk) (not applicable)
13. On-Hook (not applicable)
14. Off-Hook (not applicable)
15. Fan-Up (not applicable)
16. Fan-Down (not applicable)
17. Temp-Up (not applicable)
18. Temp-Down (not applicable)