Alesis COMPACTKIT 7 Guia Del Usuario página 6

Operation
Kits
Selecting
CompactKit 7 has several different drum kits. Each kit is a collection of sounds that make up a
typical drum set.
To select a kit, press Kit and then use the Value Down/Up buttons to select the kit number
(Preset Kit 001–045 or User Kit 046–050). A dot will appear in the display above Kit to indicate
you are selecting the kit.
To adjust the master volume, use the Master Volume Down/Up buttons (L00–L16).
Editing
CompactKit 7 lets you configure each pad separately. You can select an independent voice
(sound), volume, panning, and MIDI note for each pad.
Note: The MIDI note doesn't affect the sound of the kit during normal operation. It affects the
MIDI note the pad sends to your computer over its USB port (e.g. to your recording software,
virtual instrument plugin, etc.). See
To change the voice of a pad or footswitch:
1. Press Voice. A dot will appear in the display above Voice to indicate you are adjusting a
voice setting.
2. Hit a pad or press a footswitch to select it.
3. Use the Value Down/Up buttons to select a voice (001–265) for the pad or footswitch.
To change the sound of another pad, repeat Steps 2–3.
To set the volume of a pad or footswitch:
1. Press Volume. A dot will appear in the display above Voice to indicate you are adjusting a
voice setting.
2. Hit a pad or press a footswitch to select it.
3. Use the Value Down/Up buttons to set the volume (L00–L31) for the pad or footswitch.
To set the volume of another pad, repeat Steps 2–3.
To set the panning of a pad or footswitch:
1. Press Pan. A dot will appear in the display above Voice to indicate you are adjusting a
voice setting.
2. Hit a pad or press a footswitch to select it.
3. Use the Value Down/Up buttons to set the panning (P-8 [left] to P 0 [center] to P 8 [right])
for the pad or footswitch.
To set the panning of another pad, repeat Steps 2–3.
6
USB MIDI to learn more.