11. Children, old people and disabled people are not often aware of the dangers. Which can derive
from improper use of the appliance .The appliance should never be used without an adult
supervision.
12. Do not connect the appliance to extension cords or multiple outlets. Do not damage and do not
kink the power cord. Before cleaning the appliance or carrying out any maintenance switch off
the whole system.
13. If the appliance is out of work switch it off without tampering it .If any repair is required please
contact the Technical Assistance. Otherwise safety of the appliance can be compromised.
14. Do not locate the heater below a socket outlet
15. If the heater is covered or placed improperly, it can't be used together with programming
controller, timer or other equipment with auto control On/Off, otherwise it will cause the danger
of fire.
ASSEMBLY
Assemble the body frame and the base plate together as the following sequences:
1. Remove the mounting screw from the lower part of the body frame.
2. Insert the power cord through the slot placed in the middle part of the basement and then
assemble the body frame to the base plate.
3. Secure the body frame to the base plate by means of the two mounting screw previously
removed. Insert the power cord through the suitable slots and then fix it by the clamp.
OPERATION
Plug in the appliance. Select the power and oscillation function by
turning the knob; you can use it by following the words beside the
Knob.
SAFETY DEVICE
This appliance is provided with one safety device, the safety device disconnects the appliance
when the heater is tilted or when is tipped by means of a switch situated in the lower part of the
heater.
MAINTENANCE
The appliance needs only an external regular cleaning.
- After use and before cleaning always unplug the appliance and wait till the item is cool
- Clean the grilles from dust.
- Do not clean the painted parts with emery flour or solvents and use only a moistened cloth.
- 8 -