Makita DFL201F Manual De Instrucciones página 4

ENGLISH
(Original instructions)
1 Red part
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Lamp
7 LED indicator
SPECIFICATIONS
Model
Fastening torque
Square drive
No load speed (min
Dimensions (L x W x H)
Net weight
Rated voltage
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
4
Explanation of general view
8 Screws
9 Angle head
10 Adjust ring
11 Ring
12 Scale
13 Adjust grip
14 Hole for adjust grip
Hard joint 8 – 20 N•m
Soft joint 8 – 20 N•m
–1
)
429 mm x 72 mm x
ENE033-1
GEA010-1
GEB050-2
DFL201F DFL301F
16 – 30 N•m
16 – 30 N•m
9.5 mm
360
477 mm x 72 mm x
98 mm
1.7 kg
D.C. 14.4 V
5. Do not touch
immediately after operation; they may be
extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
15 Yellow line
16 Compression spring
17 Socket
18 Hole
19 Pin
DFL402F
25 – 40 N•m
25 – 40 N•m
9.5 mm 9.5 mm
260
477 mm x 72 mm x
98 mm 98 mm
2.0 kg 2.0 kg
the bit or the
battery cartridge,
200
workpiece
ENC007-6
read all