Spare Parts; Disposing Of The Device - Seca 685 Manual De Instrucciones Y Garantía

Weighing range 2:
0 to100 kg:
100 kg to 300 kg:
Power supply

10. Spare parts

Access ramp
RS232 adapter kit with print port
Model dependent mains unit
Description: plug-in mains unit
230 V~/50 Hz/12 V=/130 mA
Description: desk-top mains unit, switchable
115 V~/230 V~/50 – 60 Hz/9 V=/350 mA
Supplementary calibration mark
11. Disposal

Disposing of the device

Do not dispose of the device in
domestic waste. The device must
be disposed of properly as elec-
tronic waste. Follow the national
12. Warranty
A two-year warranty from date of delivery
applies to defects attributable to poor ma-
terials or workmanship. All moveable parts
- batteries, cables, mains units, recharge-
able batteries etc. - are excluded. Defects
which come under warranty will be made
good for the customer at no charge on
production of the receipt. No further
claims can be entertained. The costs of
transport in both directions will be borne
by the customer should the equipment be
located anywhere other than the custom-
er's premises. In the event of transport
damage, claims under warranty can be
Model 685
±100 g
± 200 g
mains unit
seca spare part no.: 470-00-00-009
seca spare part no.: 460-00-00-004
seca spare part no.: 68-32-10-252
seca spare part no.: 68-32-10-243
seca spare part no.: 14-05-01-886
regulations which apply in your case. For
further information, contact our service
department at:
service@seca.com
honoured only if the complete original
packaging was used for any transport and
the scale secured and attached in that
packaging just as it was when originally
packed. All the packaging should there-
fore be retained.
A claim under warranty will not be hon-
oured if the equipment is opened by per-
sons not expressly authorised by seca to
do so.
We would ask our customers abroad to
contact their local sales agent in the event
of a warranty matter.
45
GB