Setting The Clock - Seca 685 Manual De Instrucciones Y Garantía

Setting the clock

– To reach setting mode, press the
FUNC/SET key for about 2 seconds.
Depending on the version of the scale,
the year will appear immediately or ad-
ditional menu items will appear.
If additional menu items appear, use the
arrow keys to select the TIME menu
item and then press the FUNC/SET key
to reach the settings menu. The year
appears in the display.
– Use the arrow keys to set the correct
year.
– Press the FUNC/SET key to confirm
the year information entered. This si-
multaneously switches you to the next
value you can set. Change this value
too using the arrow keys and confirm
the entry using the FUNC/SET key.
Set all the values for the clock correctly
in the same way. The sequence of val-
ues is year, month, day, hour, minute.
On clocks with a 12-hour display, A ap-
pears on the left of the display for morn-
ing times and P for afternoon and
evening times.
– After you have confirmed the minutes
using the FUNC/SET key, you exit the
settings menu automatically and the
clock continues to run at the time set.
If you also require seconds to be set accu-
rately, then proceed as follows:
– set a minute which is still to come, but
do not confirm it using the FUNC/SET
key. As soon as the set minute starts,
press the FUNC/SET key. At that point,
the clock will start running at 00 sec-
onds and the set minute.
Model 685 35
GB