Troubleshooting; Ce Declaration Of Conformity - GMC GMC1152G Instrucciones Originales

Troubleshooting

Problem
Angle grinder does not start when ON/OFF Switch (2) is depressed
Cutting Disc is off centre/vibrating eccentrically
GB
Possible cause Solution
No power Check mains connection
Tool defective Contact your GMC dealer or authorised service centre
Turn 'OFF' the grinder, remove and replace the disc, as instructed in
Grinding/Cutting Disc is overly worn
'Fitting a grinding or Cutting Disc'
Turn 'OFF' the grinder, remove and replace the disc, as instructed in
Deformed grinding/Cutting Disc
'Fitting a grinding or Cutting Disc'
Turn 'OFF' the grinder and refit the disc as instructed in 'Fitting a grinding
Grinding/Cutting Disc not fitted correctly
or Cutting Disc'
12
Guarantee
To register your guarantee visit our web site at
www.gmctools.com and enter your details*.
Your details will be included on our mailing list (unless indicated otherwise) for information on future
releases. Details provided will not be made available to any third party.
Purchase Record
Date of Purchase:
Model: GMC1152G
Serial Number:
(located on motor housing)

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation Legislation.
Identification code: GMC1152G
Description: 900W Angle Grinder 115mm
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• EN60745-1:2009+A11:2010
• EN60745-2-3:2011+A2:2013
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2006+A1:2009+A2:2009
• EN61000-3-3:2013
• EN62321:2009
Retain your receipt as proof of purchase.
If registered within 30 days of purchase GMC guarantees to the purchaser of this product that if any
part proves to be defective due to faulty materials or workmanship within 24 MONTHS from the date
of original purchase, GMC will repair or, at its discretion, replace the faulty part free of charge. This
guarantee does not apply to commercial use nor does it extend to normal wear and tear or damage as
a result of accident, abuse or misuse.
* Register online within 30 days of purchase.
Terms & conditions apply.
This does not affect your statutory rights.
Notified body: Intertek
The technical documentation is kept by: GMC Tools
Date: 10/11/2017
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox, Boundary
Way, Lufton Trading Estate, Yeovil, Somerset BA22 8HZ, United Kingdom.
13
GB