Honeywell Prestige THX9000 Guía De Instalación Del Sistema página 14

Prestige TM Installation Guide
Installer setup tables
Customer contact information (optional, but recommended)
1100 Dealer name
1150 Dealer phone number
1200 Dealer email address
1250 Dealer website
1300 Dealer Message
1350 Configurable S1 Sensor Input
1355 Configurable S2 Sensor Input
1400 Configurable U1 Relay
1405 Configurable U2 Relay
1410 Configurable U3 Relay
1500 Low Speed Fan Position
Note: All installer options, including Dealer name, contact information and message can
be set up as a file and downloaded via the USB port on the thermostat.
Replacing system components
Thermostat
After installing a new thermostat, you must re-link all accessories to the new
thermostat, as described below.
1 Install and wire new thermostat (see pages 3-7).
2 Customize new thermostat (see page 8).
3 Link wireless accessories (see pages 9-10).
At the remote control:
• Press and hold the blank space (or arrow if present) in the lower
right corner of the screen until the display changes (see page 10).
• Press REMOVE, then yES to disconnect from old thermostat.
• Follow the procedure on page 10 to link to new thermostat.
At the outdoor air sensor:
• Press the CONNECT button to link to the new thermostat (see page
10).
4 Press DONE at the thermostat.
Remote control & outdoor sensor
To replace a remote control or outdoor air sensor, install batteries and follow the
procedures on pages 9-10 to link it to the thermostat.
69-2445EFS—01
Your company name
Your telephone contact
Your email address
Your web site
Edit
None
None
None
None
None
Normally Closed
14