Tuning In Radio Stations - Eton FRX1 El Manual Del Propietario

TUNING IN RADIO STATIONS:

1. Rotate band selector to select your desired band; AM,
FMST, FM, then rotate the <frequency dial> to select your
desired station(frequency);
2. The LCD display will read your desired band and
station(frequency).
WEATHERBAND TUNING:
Rotate Radio Band Dial to each WB station until you hear
the strongest WB station for your area.
SETTING UP THE CLOCK (with radio off)
Long press <tunig dial> to enter clock/alarm setting
function, rotate dial to select ALARM or setting clock (hour
and minute will flash). When hour and minute flashing, quick
press this <tuning dial>, HOUR indicator will flash, rotate the
dial to select hour, then quick press the dial again to enter
select the minutes, minute will flash, rotate dial to select
minutes. Quick press the dial again to exit clock setting.
SETTING UP THE ALARM (with radio off)
Long press <tuning dial> to enter clock/alarm setting
function, rotate dial to select ALARM, so alarm icon will
flash. Use the same setting procedure as clock to set up
hour and minute. Then quick press <tuning dial> once more,
OFF will appear on screen, turn the <tuning dial> to select
OFF/on for alarm function. If selected 'on', <ALARM> will
show on screen. Quick press this <tuning dial> again to exit
ALARM setting.
When alarm goes off, quick press the <tuning dial> to turn
it off.
SEEK FUNCTION (with radio on)
This operation only works with AM and FM band.
If you rotated the <tuning dial> clockwise the last time,
then press and hold the tuning dial and the radio will seek
the next higher frequency (or station);
4
FRX1 OWNER'S MANUAL